Browsing Makina Mühendisliği Bölümü Makale Koleksiyonu by Issue Date
Now showing items 1-13 of 13
-
Mixed-Mode Fracture Analysis Of Orthotropic Functionally Graded Materials Under Mechanical And Thermal Loads
(Pergamon-Elsevier Science Ltd, 2007)Mixed-mode fracture problems of orthotropic functionally graded materials (FGMs) are examined under mechanical and thermal loading conditions. In the case of mechanical loading, an embedded crack in an orthotropic FGM layer ... -
Buckling of an Orthotropic Graded Coating with An Embedded Crack Bonded to a Homogeneous Substrate
(Pergamon-Elsevier Science Ltd, 2009)To simulate buckling of nonuniform coatings, we consider the problem of an embedded crack in a graded orthotropic coating bonded to a homogeneous substrate subjected to a compressive loading. The coating is graded in the ... -
Sliding Frictional Contact Between a Rigid Punch and a Laterally Graded Elastic Medium
(Pergamon-Elsevier Science Ltd, 2009)Analytical and computational methods are developed for contact mechanics analysis of functionally graded materials (FGMs) that possess elastic gradation in the lateral direction. In the analytical formulation, the problem ... -
Computation Of Thermal Fracture Parameters For Orthotropic Functionally Graded Materials Using J(K)-Integral
(Pergamon-Elsevier Science Ltd, 2010)This article introduces a computational method based on the J(k)-integral for mixed-mode fracture analysis of orthotropic functionally graded materials (FGMs) that are subjected to thermal stresses. The generalized definition ... -
Periodic Crack Problem for a Functionally Graded Half-Plane an Analytic Solution
(Pergamon-Elsevier Science Ltd, 2011)The plane elasticity problem of a functionally graded semi-infinite plane, containing periodic imbedded or edge cracks perpendicular to the free surface is considered. Cracks are subjected to mode one mechanical or thermal ... -
A Framework for Structural Modelling of an Rfid-Enabled Intelligent Distributed Manufacturing Control System
(Southern African Inst Industrial Engineering, 2014)A modern manufacturing facility typically contains several distributed control systems, such as machining stations, assembly stations, and material handling and storage systems. Integrating Radio Frequency Identification ... -
Fully Compliant Spatial Four-Bar Mechanism
(Japan Soc Mechanical Engineers, 2015)This paper presents a novel study on the analysis of the "fully compliant" spatial four-bar mechanism. To the best of our knowledge, any research on "fully compliant" spatial four-bar mechanism is not available in the ... -
On The Analysis Of Double Wishbone Suspension
(Japan Soc Mechanical Engineers, 2015)This paper introduces novel approaches for analysis of the double wishbone suspension mechanism. In the literature, to the best of our knowledge there is no analysis study available for the double wishbone mechanism that ... -
On The Analysis Of Double Wishbone Suspension Regarding Steering Input And Anti-Dive/Lift Effect
(Japan Soc Mechanical Engineers, 2016)In this study, a novel kinematic analysis procedure of the double wishbone suspension mechanism regarding steering input is proposed. In the previous study, published by the authors, the double wishbone mechanism was ... -
On The Synthesis Of A Geared Adjustable Stroke Mechanism
(Japan Soc Mechanical Engineers, 2018)This study presents novel analysis and synthesis methods for a certain type of geared adjustable stroke mechanism. The mechanism has significance in mechanical design, as it has been used in practice. However, to the best ... -
Novel Compliant Wiper Mechanism
(Copernicus Gesellschaft Mbh, 2018)Conventional wiper mechanisms that are used in automotive vehicles comprise numerous linkages and joints. In this study, in order to obtain a simpler design, a novel compliant wiper mechanism is introduced. The wiper ...
